S30403 steel – quick summary
S30403 is a(n)
chinese steel
defined in GB/T 3280-2015 standard.
(Looking for this designation of material quality, but standard does not match? Click here!)
DISCLAIMER: Following data are highlights from the EQUIMETALS database. These data are partially masked and for informational purposes only.
To access the full datasheet of the selected steel grade, please register to the free version of EQUIMETALS here
Basic information
Chemical composition (S30403)
Use Case Information
Material groups (S30403)
Exact matches for S30403 in ASTM A959-16 standard
- Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- Austenitic steel
- EN1503/2-2000
- Valves. Materials for bodies, bonnets and covers. Part 1: Steels other than those specified in European Standards
- Corrosion resistant steel
- Heat resisting steel
- Cr-Ni steel
- Stainless Steel Bars and Shapes
- Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater and Heat-Exchanger Tubes
- Seamless and Welded Austenitic Stainless Steel Pipes
- Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- Stainless steel
- Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger and Condenser Tubes
- Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate and Flat Bar
- Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
- Wrought Austenitic Stainless Steel Piping Fittings
- Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
- Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
- Welded Austenitic Stainless Steel Feedwater Heater Tubes
- As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
- Welded, Unannealed Austenitic Stainless Steel Tubural Products
- Single-or Double-Welded Austenitic Stainless Steel Pipe
- Cold-Worked Welded Austenitic Stainless Steel Pipe
- High-Frequency Induction Welded Unannelaed Austenitic Steel Condenser Tubes
- Spray-Formed Seamless Austenitic Stainless Steel Pipes
- Specifying Harmonized Standard Grade Composition for Wrought Stainless Steels
- Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- Stainless Steel Billets and Bars for Forging
- Stainless Steel Forgings
- Chromium-Nickel Stainless Steel Weaving and Knitting Wires
- Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
- Stainless Steel Wire
- Rolled Floor Plate, Stainless Steel
- Steel Forgings, Austenitic for Pressure and High Temperature parts
- Cold finished stainless steel bars
- Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
- Stainless and heat-resisting steels
- Stainless steel bars
- Thinnest-wall seamless tubes of stainless steels
- Stainless steel small diameter seamless steel tubes
- Cold rolled stainless steel plate, sheet and strip
- Hot rolled stainless steel plate, sheet and strip
Matches for S30403 in any standard defining this steel grade
Usual delivery conditions/forms (S30403)
Exact matches for S30403 in ASTM A959-16 standard
Matches for S30403 in any standard defining this steel grade
Typical applications (S30403)
Exact matches for S30403 in ASTM A959-16 standard
- Sheet
- Plate
- Thin sheet
- Strip
- Pressure vessel
- Deep-drawn parts
- Strip for welded tubes
- Plate, sheet, strip
- Steel bar
- Section steel
- Shaped section
- Steel pipe for high-temperature and general corrosive service
- Fitting
- Pipe fitting
- Flange
- Valve
- Flat steel
- Band steel
- Architectural applications
- Magnetic application
- Cryogenic applications
- Heat resisting parts
- Dairy tubing
- Tubing for the food industry
- Tubing for the pharmaceutical industry
- Corrosion resistant fasteners
- Wire in coils
- bars
- Seamless tube
- Seamless pipe
- Smls. pipe
- Stainless steel tubes
Matches for S30403 in any standard defining this steel grade
Mechanical properties (S30403) - available in several states, such as
Exact matches for S30403 in ASTM A959-16 standard
- solution heat-treated
- annealed and hot finished
- annealed and cold finished
- quenched
- solution heat-treated and quenched
- soft annealed
- A
- 1/16 hard
- 1/8 hard
- 1/4 hard
- 1/2 hard
- heat-treated (tubes for the pharmaceutical industry)
- heat-treated
- untreated
- annealed
- bright annealed
- cold drawn
- lightly drafted
- solution annealed (+AT)
Matches for S30403 in any standard defining this steel grade
Heat treatment information (S30403) – available instructions for many scenarios, such as
Exact matches for S30403 in ASTM A959-16 standard
- annealing - rapid cooling
- annealing - water
- quenching - fluid
- quenching - liquid
- quenching - oil
- quenching - polymer
- quenching - rapid air
- quenching - rapid cooling
- quenching - water
Matches for S30403 in any standard defining this steel grade
About our service
EQUIMETALS can provide exact chemical composition, mechanical properties in several states, heat treatment procedures for various purposes, as well as detailed corrosion information for over 70 corrosive mediums in several combinations of concentration and temperature.
EQUIMETALS can also offer you close equivalent and similar steels from different countries, and provide you a list of the most typical use case scenarios.
Should you need the information of suitable welding materials, EQUIMETALS can offer you different fillers from several manufacturers. And we have many more information for you!
Get interested? Try out for free!
« Back...