X4CrNiMo16-5-1 steel – quick summary
X4CrNiMo16-5-1 is a(n)
swedish steel
defined in SS-EN 10088-1:2014 standard.
(Looking for this designation of material quality, but standard does not match? Click here!)
Basic information
Chemical composition (X4CrNiMo16-5-1)
Use Case Information
Material groups (X4CrNiMo16-5-1)
Exact matches for X4CrNiMo16-5-1 in BAS EN 10028-7:2017 standard
- Corrosion resistant steel
- Sheet/plate and strip for general purposes
- Martensitic steel
- Semi-finished products, bars, rods, and sections for general purposes
- Flat products made of steels for pressure purposes
- Stainless steel
- Open die steel forgings for general engineering purposes
- Stainless steel bars for pressure purposes
- Martensitic stainless steel
- Stainless steels. List of stainless steels.
- Stainless steels. Sheet/plate and strip of corrosion resisting steels for general purposes.
- Stainless steels. Semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes.
- Flat products made of steel for pressure purposes. Stainless steels.
- Stainless steels for general purposes. Corrosion-resistant flat products
- Stainless steels: chemical composition
Matches for X4CrNiMo16-5-1 in any standard defining this steel grade
Usual delivery conditions/forms (X4CrNiMo16-5-1)
Exact matches for X4CrNiMo16-5-1 in BAS EN 10028-7:2017 standard
Matches for X4CrNiMo16-5-1 in any standard defining this steel grade
Typical applications (X4CrNiMo16-5-1)
Exact matches for X4CrNiMo16-5-1 in BAS EN 10028-7:2017 standard
- Sheet, cold rolled
- Plate, hot rolled [P]
- Strip, cold-rolled [C]
- Strip, hot-rolled [H]
- Forging
- Forged piece
- Forged bar
- Steel bar
- cold rolled strip, C
- hot rolled strip, H
- hot rolled plate, P
- bars
- rods
- Wire
- sections
- bright products
- flat products
- Pressure vessel
Matches for X4CrNiMo16-5-1 in any standard defining this steel grade
Mechanical properties (X4CrNiMo16-5-1) - available in several states, such as
Exact matches for X4CrNiMo16-5-1 in BAS EN 10028-7:2017 standard
- quenched and tempered
- annealed [H, hot rolled strip]
- soft annealed
- A
- 1C, 1E, 1D, 1X, 1G, 2D
- quenched and tempered [QT760]
- quenched and tempered [QT900]
- soft annealed [bars]
- soft annealed [wire rod]
- 2H, 2B, 2G, 2P
- quenched and tempered [bars]
- quenched and tempered [wire rods]
- heat-treated (P = hot rolled plate)
- heat-treated / 1C, 1E, 1D, 1X, 1G, 2D
- annealed [bright bars, cut lengths from wire] / 2H, 2B, 2G, 2P
- quenched and tempered [bright bars, cut lengths from wire] / 2H, 2B, 2G, 2P
- quenched and tempered (P = hot rolled plate)
- quenched and tempered (+QT)
Matches for X4CrNiMo16-5-1 in any standard defining this steel grade
Heat treatment information (X4CrNiMo16-5-1) – available instructions for many scenarios, such as
Exact matches for X4CrNiMo16-5-1 in BAS EN 10028-7:2017 standard
- annealing - air
- annealing - furnace
- hot forming - air
- quenching - air
- quenching - oil
- quenching - water
Matches for X4CrNiMo16-5-1 in any standard defining this steel grade
About our service
EQUIMETALS can provide exact chemical composition, mechanical properties in several states, heat treatment procedures for various purposes, as well as detailed corrosion information for over 70 corrosive mediums in several combinations of concentration and temperature.
EQUIMETALS can also offer you close equivalent and similar steels from different countries, and provide you a list of the most typical use case scenarios.
Should you need the information of suitable welding materials, EQUIMETALS can offer you different fillers from several manufacturers. And we have many more information for you!
Get interested? Try out for free!
« Back...