41Cr4 steel – quick summary
41Cr4 is a(n)
swedish steel
defined in SS-EN 10277:2018 standard.
(Looking for this designation of material quality, but standard does not match? Click here!)
Basic information
Chemical composition (41Cr4)
Use Case Information
Material groups (41Cr4)
Exact matches for 41Cr4 in BDS EN 10263-4:2018 standard
- Quenched and tempered steels
- Technical delivery conditions for special steels
- Fully killed steel
- Non-rimming steel
- FF
- Steel for cold up-setting
- Cold heading steel
- Steel for cold extrusion
- Wrought steels
- Quenched and tempered seamless circular steel tube
- Open die steel forgings for general engineering purposes
- Alloy special steels
- Steel rod, bars and wire for cold heading and cold extrusion
- Seamless circular tubes for mechanical and general engineering purposes
- Non-alloy and alloy steel tubes
- Alloy steel
- Steel rod, bars and wire for cold heading and extrusion. Steels for quenching and tempering.
- Bright steel products
- Heat-treatable steels, alloy steels and free-cutting steels. Alloy steels for quenching and tempering
Matches for 41Cr4 in any standard defining this steel grade
Usual delivery conditions/forms (41Cr4)
Exact matches for 41Cr4 in BDS EN 10263-4:2018 standard
- Bars
- Rods
- Wire
- +AC; spheroidize annealed, as heat-treated [rod, bar, wire]
- +AC+PE; spheroidize annealed, peeled [rod, bar, wire]
- +U+C+AC; untreated and cold drawn / spheroidize annealed [wire]
- +U+C+AC+LC; untreated, and cold drawn (spheroidize annealed), skin passed [wire]
- Bright bars
- Semi-finished products
- Wire rods
- Flat products
- Hammer forgings
- Drop forgings
Matches for 41Cr4 in any standard defining this steel grade
Typical applications (41Cr4)
Exact matches for 41Cr4 in BDS EN 10263-4:2018 standard
- Vehicle parts
- Motor components
- Front axle
- Fore-axle
- Crankshaft
- Steering knuckle
- Billet
- Steel bar
- Wire rod
- Wide flats
- Wide strip
- Universal mill plate
- Seamless tube
- Seamless pipe
- Smls. pipe
- Tubes for machine purposes
- Apparatuses
- Pressure vessel
- Pipeline
- Forging
- Forged piece
- Forged bar
- Steel rod, bars and wire for cold heading and cold extrusion
- Cold drawn, turned, ground bright bar
Matches for 41Cr4 in any standard defining this steel grade
Mechanical properties (41Cr4) - available in several states, such as
Exact matches for 41Cr4 in BDS EN 10263-4:2018 standard
- quenched and tempered
- soft annealed
- A
- quenched and tempered [flat product]
- treated to shearing
- spheroidize annealed
- spheroidized and bright turned
- cold drawn and spheroidized
- cold drawn and spheroidized and mildly cold drawn
- annealed
- annealed, in protective atmosphere
- +AC - EN10263/3
- spheroidize annealed, as heat-treated [wire rod, bar]
- +AC+PE - EN10263/4
- spheroidize annealed, skin passed [wire rod, bar]
- +U+C+AC
- untreated and cold drawn / spheroidize annealed [bar and wire]
- +U+C+AC+LC
- untreated, and cold drawn (spheroidize annealed), skin passed [bar, wire]
- +AC; spheroidize annealed, as heat-treated [rod, bar, wire]
- +AC+PE; spheroidize annealed, peeled [rod, bar, wire]
- +U+C+AC; untreated and cold drawn / spheroidize annealed [wire]
- +U+C+AC+LC; untreated, and cold drawn (spheroidize annealed), skin passed [bar, wire]
- soft annealed and bright-turned (+A+SH)
- soft annealed and cold drawn (+A+C)
- quenched and tempered and turned (+QT+SH)
- cold drawn and quenched and tempered (+C+QT)
- quenched and tempered and cold drawn (+QT+C)
- quenched and tempered and cold drawn (+QT+C) flat product
- quenched and tempered (+QT)
- treated for cold shearing (+S)
- soft annealed (+A)
Matches for 41Cr4 in any standard defining this steel grade
Heat treatment information (41Cr4) – available instructions for many scenarios, such as
Exact matches for 41Cr4 in BDS EN 10263-4:2018 standard
- quenching - (min. 1/2 h)
- quenching - oil
- quenching - synthetic
- quenching - water
- tempering - (min. 1 h)
- tempering - air
- tempering - quiet air
Matches for 41Cr4 in any standard defining this steel grade
About our service
EQUIMETALS can provide exact chemical composition, mechanical properties in several states, heat treatment procedures for various purposes, as well as detailed corrosion information for over 70 corrosive mediums in several combinations of concentration and temperature.
EQUIMETALS can also offer you close equivalent and similar steels from different countries, and provide you a list of the most typical use case scenarios.
Should you need the information of suitable welding materials, EQUIMETALS can offer you different fillers from several manufacturers. And we have many more information for you!
Get interested? Try out for free!
« Back...