C35 steel – quick summary
C35 is a(n)
swedish steel
defined in SS-EN ISO 683-1:2018 standard.
(Looking for this designation of material quality, but standard does not match? Click here!)
Basic information
Chemical composition (C35)
Use Case Information
Material groups (C35)
Exact matches for C35 in BDS EN 10277:2018 standard
- Quenched and tempered steels
- Creep resisting materials for screws and nuts for service at elevated and at high temperatures
- Ferritic steel
- Technical delivery conditions for non alloy steels
- Fully killed steel
- Non-rimming steel
- FF
- Wrought steels
- Cold-rolled, quenched and tempered or spring steel strip
- Schedules for wrought steels
- Carbon steel
- Unalloyed steel
- Quenched and tempered seamless circular steel tube
- Bright unalloyed steel
- Quality steel
- QS
- Bright steel products
- Steels for general engineering purposes
- Open die steel forgings for general engineering purposes
- Non-alloy quality and special steels
- Heat-treatable steels, alloy steels and free-cutting steels. Non-alloy steels for quenching and tempering
Matches for C35 in any standard defining this steel grade
Usual delivery conditions/forms (C35)
Exact matches for C35 in BDS EN 10277:2018 standard
Matches for C35 in any standard defining this steel grade
Typical applications (C35)
Exact matches for C35 in BDS EN 10277:2018 standard
- Structural components of medium stress
- Automobile components
- Vehicle parts
- Details [mech. engineering]
- Motor components
- Round steel bar, hot rolled
- Square bar
- Square
- Hexagon
- Strip, cold-rolled [C]
- Stopper
- Regulating screw
- Adjusting screw
- Stud [bolt]
- Screw, machined: 5.6 [M2-M39]
- Screw, machined: 5.8 [M2-M39]
- Screw, hot formed: 8.8 [M8-M16]
- Screw, machined: 8.8 [M3-M16]
- Screw-nut: 6
- Screw-nut: 8
- Thin nut: 04
- Thin nut: 05
- Thin nut: 06
- Serrated washer
- Crankpin
- Jaw clutch part
- Chain link
- Taper pin
- Spherical washer
- Cup washer
- High-temperature bolt
- High-temperature nut
- Seamless tube
- Seamless pipe
- Smls. pipe
- Steel bar
- Wire rod
- Wide flats
- Wide strip
- Universal mill plate
- Sheet
- Thin sheet
- Heavy plate
- Strip
- Open die forging
- Closed die forging
- Stamping
- Plate
- Section steel
- Shaped section
- Billet
- Forging
- Forged piece
- Tube
- Pipe
- Tubes for machine purposes
- Apparatuses
- Pressure vessel
- Pipeline
- Flat steel
- Band steel
- Cold drawn, turned, ground bright bar
- Forged bar
Matches for C35 in any standard defining this steel grade
Mechanical properties (C35) - available in several states, such as
Exact matches for C35 in BDS EN 10277:2018 standard
- quenched and tempered
- normalized
- soft annealed
- A
- quenched and tempered [flat product]
- rolled, hard
- hot rolled
- cold drawn and soft annealed
- cold drawn
- cold drawn and tempered
- annealed
- annealed, in protective atmosphere
- as rolled and turned
- cold drawn flat product
- normalized and tempered
- as rolled and turned (+SH)
- cold drawn (+C)
- cold drawn (+C) flat product
- normalized (+N)
- quenched and tempered (+QT)
Matches for C35 in any standard defining this steel grade
Heat treatment information (C35) – available instructions for many scenarios, such as
Exact matches for C35 in BDS EN 10277:2018 standard
- normalizing - (min. 1/2 h)
- quenching - oil
- quenching - synthetic
- quenching - water
- tempering - (min. 1 h)
- tempering - air
- tempering - quiet air
Matches for C35 in any standard defining this steel grade
About our service
EQUIMETALS can provide exact chemical composition, mechanical properties in several states, heat treatment procedures for various purposes, as well as detailed corrosion information for over 70 corrosive mediums in several combinations of concentration and temperature.
EQUIMETALS can also offer you close equivalent and similar steels from different countries, and provide you a list of the most typical use case scenarios.
Should you need the information of suitable welding materials, EQUIMETALS can offer you different fillers from several manufacturers. And we have many more information for you!
Get interested? Try out for free!
« Back...